Hostile vehicle mitigation, road blockers, bollards, gates, turnstiles and perimeter detection designed to HCIS and PAS 68 baselines — and integrated with Honeywell access control so the security room works from one picture.
Physical security is where the site meets the outside world: the approach road, the vehicle checkpoint, the pedestrian entrance and the fence line. ESC designs and delivers the equipment that controls those points — hostile vehicle mitigation, barriers, gates, turnstiles and perimeter detection — with the civil, electrical and control interfaces that make the equipment work as a system rather than a set of products.
Design baselines follow HCIS requirements for regulated facilities and PAS 68 impact ratings for vehicle barriers where the risk assessment calls for them; final selection follows the consultant specification and the authority's requirements. Every barrier, gate and turnstile is integrated with Honeywell access control and video, so an event at the perimeter appears in the security control room with the camera view and the credential record attached.
From the approach road to the lobby turnstile, specified against the site's risk assessment.
Road blockers, rising bollards and crash-rated barriers for checkpoints and standoff lines, selected against PAS 68 impact ratings and the site's vehicle-threat assessment, with foundations, hydraulics and controls coordinated on site.
Boom barriers, sliding and swing gates, tyre killers and traffic control for staff, visitor and service entrances — with reader, intercom and ANPR interfaces to the access-control system.
Full-height and waist-height turnstiles, speed gates and security portals for lobbies and staff entrances, with card, biometric and visitor-credential integration and emergency free-egress logic tied to the fire system.
Fence-mounted sensors, buried cable and thermal or video-analytics detection along the fence line, zoned to the site plan and verified by camera before an alarm reaches the operator.
Under-vehicle inspection, guardhouse control desks, intercom and traffic signalling at vehicle checkpoints, arranged so the guard controls the barrier sequence from one position.
Barriers, gates and turnstiles managed as doors in Honeywell Pro-Watch, with video call-up in Honeywell video management and alarm handling in the security control room.
Physical security packages carry civil, electrical and control documents together — the reviewer sees the whole interface.
Equipment selection against the risk assessment, HCIS and PAS 68 baselines, layouts, civil interfaces and control logic to the consultant specification.
Barriers, gates, turnstiles and perimeter equipment from the manufacturers specified, with certification in the submittal.
Foundations, equipment and control wiring coordinated with civil and electrical works, under method statements and ITPs.
Cycle tests, interlock and emergency-open tests, and integration verification with Honeywell access control and video.
As-built drawings, O&M manuals and training for the security operators and maintenance team.
Preventive maintenance for hydraulic and mechanical equipment, spares and technical support in the Kingdom.
Destinations and secure facilities where ESC delivered security systems. The scope shown is ESC's package; sensitive references are described in general terms only.
Illustrative visual — not a site photograph
Illustrative visual — not a site photograph
Illustrative visual — not a site photograph